Graco’s chemical injection pumps dispense and dose chemicals at gas and oil wellheads, as well as pipelines. They design portable, oilfield chemical injection pumps to operate at many pressures and work in harsh environments, which make them ideal for chemical injection applications.

Graco produces them in several drive types: AC, DC, and pneumatic, each offering distinct benefits depending on your requirements. In addition, to complete pumps, Graco also offers fluid and drive modules to customize your pump to your unique power supply and fluid requirements.

Electric Driven Pumps

Harrier+ Controller

Harrier Controllers

Graco
Best Seller
In Stock

Features: The Harrier+ controller allows for full chemical injection automation. It unlocks features and capabilities that allow you to optimize your chemical usage saving you time and money!

The controller works by controlling the injection rate via timing, cycle count, or flow control. The adaptive injection rate controls provide an accuracy of +/- 1%. The controllers use sensors along with Graco software to adjust to changes in the application such as well pressure or battery voltage. It also controls and monitors your system remotely with a cellular connection and web app. The remote connectivity allows you to monitor, control and calibrate your system via cellular or SCADA connection (Modbus). The Harrier+ controller can be made available as a standalone controller or in the power box & control panel kits.

The controller is classified for hazardous location Class 1, Divison 2, Groups A, B, C, D, T4.

The Harrier+ will provide a noticeable ROI via chemical savings, power-saving, and low cost of ownership.

Wolverine Chemical Injection Hazardous Location Pumps

Wolverine Chemical Injection Hazardous Location Pump

Graco
Best Seller
In Stock

Features: The Wolverine™ Hazardous Location pumps are designed to operate in applications requiring Class 1, Division 1, rated products. They have 316 SST wetted parts, plus they’re resistant to water and dust.

Flow rates up to 1,211 LPD and a pressure rating up to 10,000 PSI. Precision stroke adjustment between 1/2″ to 1″ ensures accurate injection rates. HNBR, FKM, FKM-ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals. The AC and DC operated motors are rated for use in Division 1 Hazardous (Classified) Locations per the following standards: Class 1, Div 1, Group C & D.

Wolverine Variable Speed Pump

Wolverine Variable Speed Pumps

Graco
Best Seller
In Stock

Features: The variable speed Wolverine pump provides continuous injection for an even dispersion of chemicals. Flow rates are adjusted between 10 and 100% by a control dial on the motor eliminating the need for a localized controller. The fluid heads are interchangeable between all Wolverine Advanced series pumps. High efficiency 12 or 24VDC brushless motors use less amperage draw than traditional brushed DC motors. It can be integrated with the Harrier+ and alternative energy sources for a fully automated, green pump.

Available in simplex or duplex configuration with flow rates from 2 LPD up to 370 LPD (based on configuration), and pressures ranging from 600 PSI to 10,000 PSI.
Class 1, Div 2, Groups A, B, C, D.

G-Chem
In Stock

Features: G-Chem Series pumps are ideal for chemical injection applications. They are easy to operate and far exceed the performance of similar pumps of its class. Available in AC and DC power configurations and can be paired with the Harrier Controller. Available sizes from 1/4″ to 1/2″ with flow rates from 8 GPD to 66 GPD and pressures from 800 to 2500 PSI. Fluid ends are stainless steel and offered with Chromex™ coated plungers making it a preferred choice for a wide variety of chemical applications.

G-Chem JR

G-JR Chemical Injection Pump

Graco

Features: The Graco G-JR is an ideal chemical injection pumping solution that has been engineered to offer reliable chemical dosing at a low cost. Offered in DC solar or AC electric, the pumps come standard with the Harrier™ EZ-JR controller which offers a similar set of features as the current Harrier EZ controller.

The simple design has a single plunger size with a maximum output of 30.3 LPD at 2000PSI. It is ideal for a low-cost automatable solution.

Mongoose

Mongoose Electric Powered Chemical Metering Pump

Graco

Features: The Mongoose Series metering pump is ideal for dispensing chemicals for a variety of diverse markets such as oil and natural gas, mining, agriculture, landscaping, and lawn maintenance, waste water, and car wash. These pumps can also be used in chemical dosing maintenance applications including cooling towers, boilers, and plating, as well as a multitude of other uses.

Stainless Steel head, PEEK and PTFE diaphragm, and seal material can be used in a host of chemical applications. Flow rates range from 17 GPD to 45 GPD and pressures of 75 PSI to 250 PSI.

Graco MPI - Electric

Multipoint Chemical Injection Solutions

Graco

Features: The Graco Multipoint injection system allows you to control up to 8 injection points using a single pump and controller. Set, change, and remotely monitor the individual flow rates of each injection point to help reduce the number of trips to the well site and minimize downtime. Receive alarm notifications on your phone, computer, or smart device if any disruptions in operation occur.

The Harrier+ MPI Controller features Smart Logic for solenoid failure detection. The system will continue to operate while servicing a solenoid valve to help minimize downtime. In the event of a solenoid failure, alarms will identify which one needs replacement. The controller activates one valve at a time for maximum dosing efficiencies.

The KRAKN MPI replaces up to eight chemical pumps with just one when used in conjunction with the KRAKN MPI fluid manifold. Pair it with Graco’s Harrier+ MPI control box and chemical pumps for best dosing accuracy. It is available from 2 up to 8 injection points, 316 Stainless Steel construction rated for 3000 PSI (345 Bar), using FFKM seals, and is C1D1 and GP.

Pneumatic Driven Pumps

Python Pneumatically Operated Pump

Features: Python pumps are ideal for applications that require a pump to operate in a potentially explosive atmosphere and can run off regulated natural gas or compressed air. The Python uses half the air consumption of other pumps in the market. Plus, the Python’s extreme duty plungers, seals, and timing valve are designed for years of operation before replacement.

Pythons are offered with Chromex and Ceramic coated plungers and a standard 316 SST fluid section/wetted parts. HNBR, FKM, FKM ETP, TFEP, and FFKM plunger packings and check valve seals available.
The Python’s proprietary poppet style check valve eliminates the valve from sticking.

The Python is available in flow rates from 6 LPD to 70 LPD and injection pressures of over 10,000 PSI.

Python XL

Python XL Series Pumps

Graco
In Stock

Features: The Python XL Series pumps are ideal for wells with low gas pressure – it only requires a minimum of 15 PSI to operate! The pump has a very low air/gas consumption making for increased efficiency. Up to 97% of the exhaust gas is recoverable which makes the Python XL an environmentally friendly pneumatic pump.

Fluid ends are available in 316 SS with multiple packing choices (HNBR, FKM, FKM ETP, FFKM, and TFE/P). Flow rates are available from 379 LPD to approximately 1500 LPD with a pressure range up to 1200 PSI.

Python XL-DA

Python XL-DA Series Pumps

Graco

Features: Python XL-DA series pumps are suitable for chemical injection applications that require higher flows at high pressures. These pumps operate on low gas or compressed air pressures and utilize the same Merkur® air motor used on other Graco products. With an option gas kit, the pump can recover its exhaust. It is self-priming and double-acting which provides continuous flow operation and prevents the pump from air locking.

Double Acting
• Pumps fluid in both directions of the stroke for increased flows
• Provides continuous flow operation for better pump efficiencies

Self Priming
• Anti-locking so air cannot get trapped inside air motor and stall pump
• Pump can free itself of air and resume pumping without any adjustments

The pump is capable of up to 3000 LPD and pressures up to 6000 PSI.

Pump Parts

Graco No-Drip Fluid End - photo

No-Drip Fluid End

Graco
Best Seller
In Stock

Features: The Graco No-Drip Fluid Ends are designed to eliminate chemical leaks via a flexible hose assembly, helping you to avoid hazardous maintenance and limit environmental impact. The No-Drip Fluid End works harmoniously with Graco pumps and almost all legacy style pumps in the market, offering you a versatile and hassle-free solution.

Features:

• 316 SS Construction: Ensures durability and long-lasting performance.
• Double Packing Stack: Extra protection to guarantee the security of your chemicals.
• Flexible Return Hose: For ease of maintenance.
• Proprietary Graco Check Valve: Unitized, poppet style check valve – an industry-leading feature you can trust.
• Legacy Adapter: Compatibility with competitor pumps to make your transition seamless.

Solar Pumps + Accessories

Harrier+ Smart Controller & Chemical Management System

Harrier+ Smart Controller & Chemical Management System

Graco

Features: The Graco Harrier+ Smart Controller allows you to automate any style pump. Utilizing time, cycle and flow run modes, the Harrier+ will provide an immediate ROI on costly chemicals, unnecessary trips to a well or pipeline site, and downtime.

The Harrier+ communicates via Modbus or cellular and can tie into existing SCADA networks. The web-based portal will allow you to collect, monitor, and analyze pump data.

The controller has 4-20 mA input and a 4-20 mA or 0-10 VDC output. It can accept inputs from any of the following devices: temperature, pressure transducer, tank level monitor, etc.

The Harrier+ is classified for hazardous location Class 1, Div 2, Groups A, B, C, D, and T4.

Graco MPI

Multipoint Chemical Injection Solutions

Graco

Features: The Graco Multipoint injection system allows you to control up to 8 injection points using a single pump and controller. Set, change, and remotely monitor the individual flow rates of each injection point to help reduce the number of trips to the well site and minimize downtime. Receive alarm notifications on your phone, computer, or smart device if any disruptions in operation occur.

The Harrier+ MPI Controller features Smart Logic for solenoid failure detection. The system will continue to operate while servicing a solenoid valve to help minimize downtime. In the event of a solenoid failure, alarms will identify which one needs replacement. The controller activates one valve at a time for maximum dosing efficiencies.

The KRAKN MPI replaces up to eight chemical pumps with just one when used in conjunction with the KRAKN MPI fluid manifold. Pair it with Graco’s Harrier+ MPI control box and chemical pumps for best dosing accuracy. It is available from 2 up to 8 injection points, 316 Stainless Steel construction rated for 3000 PSI (345 Bar), using FFKM seals, and is C1D1 and GP.

The MPI can be integrated with all Graco pumps and installed in a full turn-key package. The package can come complete with a tank, pump, controller, battery, solar panels, etc.

Specialty Pumps

G-Chem Beam Pump

G-Chem Beam Pump

Graco

Features: The G-Chem Beam Pump provides reliable and robust means of injecting chemicals by operating with a pumpjack. The G-Chem is a positive displacement plunger-type pump powered by a direct connection with a cable or rod to the pumpjack’s walking beam.

The pump has a maximum flow rate of 75 LPD and pressures up to 25 PSI. The head is 316 SS and can have a variety of seals (FKM, HNBR, and TFE/P).

View Items