Hawk Measurement Systems (HAWK) is the world leader in level, positioning, asset monitoring, and flow measurement technology, providing cutting-edge equipment and complete solutions to the global industrial market.

For over 30 years, HAWK has successfully solved difficult liquids and solids applications in a wide range of industries including mining/mineral processing, water supply/wastewater, oil & gas, bulk material handling, chemical, power, cement, pulp & paper, and food.

Acoustic Wave Transmitters

Hawk Sultan Acoustic Wave Level Transmitter POE - Zimco

Sultan Acoustic Wave Level Transmitter – Power over Ethernet (PoE) Series

Hawk Measurement
In Stock

Features: The Sultan Acoustic Wave Level Transmitter with Power over Ethernet (PoE) is ideal for level, flow, positioning and collision protection to a distance of 60m (196ft) or up to 180m (588ft) for extended ranges. HAWK is the only company on the market to offer PoE connectivity for Acoustic Wave Level Measurement. This rugged, self-cleaning sensor requires zero maintenance and is ideal for measuring the level of liquids, slurries, and solids. The combination of low frequency, high power, and signal processing (Adaptive Gain Technology) creates one of the world’s most reliable level devices available on the market.

• Non-contact measurement
• High Power even with two-wire loop supply
• Low cost per point
• Wide range of communications: GosHawk, HART, Modbus, Profibus PA, Profibus DP, Foundation Fieldbus, DeviceNet, Modbus over Ethernet TCP/IP, Wi-Fi, PoE
• Pump Control x5 pumps
• Auto compensation for dust, steam, and losses
• Protection class IP67, NEMA 4x (IP68 Transducer)
• Programmable fail-safe mode
• 3G remote setup options / configuration
• Differential and average level control (2 transducers).

Industries:
• Water / Wastewater (River Level, Wet Wells, Inlet Screens, Tanks, Sumps, Pump Stations, Water Towers, Dams, Basin Levels, and Chemical Storage)
• Mining (Crushers, Surge Bins, Ore Passes, Conveyor Profile, Blocked Chute, Stockpile, Stackers, Reclaimers, Storage Silos, etc.)
• Power Stations (Boiler Bunkers, Raw Coal Bunkers, Ash Pits, Fly Ash Silos, etc.)
• Others (Food, Cement, Plastics, Grain, Chemicals, Paper, Irrigation, and Quarries)

Hawk Sultan Non-Contact Acoustic Wave Series - Zimco

Sultan Non-Contact Acoustic Wave Series

Hawk Measurement
In Stock

Features: The Sultan is a powerful non-contact Acoustic Wave transmitter for level, flow, positioning, and collision protection. This self-cleaning sensor requires zero maintenance and is ideal for measuring the level of liquids, slurries, and solids. The combination of low frequency, high power, and signal processing (Adaptive Gain Technology) creates one of the world’s most reliable level devices available on the market.

• Self-cleaning sensor face requires no maintenance
• Non contact measurement
• High power even with a two-wire loop supply
• Wide range of communications: Power over Ethernet (PoE), GosHawk, HART, Modbus, Profibus PA, Profibus DP, Foundation Fieldbus, DeviceNet, Modbus over Ethernet TCP/IP, Wi-Fi
• Programmable fail-safe mode

Industries:
• Mining
• Water / Wastewater
• Power Stations
• Chemicals
• Plastics
• Food and Beverage

Blocked Chute Microwave Switch

Hawk Gladiator Acoustic Switch - Zimco

Gladiator Acoustic Switch

Hawk Measurement
In Stock

Features: The Gladiator Acoustic Switch can be used for blockage detection, barrier detection, machine detection/protection, and point level measurement, and detection of objects or material between two points.

• No contact with the product required
• Self-cleaning transducers
• Heavy-duty titanium version available
• Designed for dusty, wet environments
• LCD setup/diagnostics on the remote amplifier
• Simple
• 1-minute setup

Industries:
• Blocked chute detection in wet or dry environments
• Wet screen blocked chute detection
• Nucleonic / tilt switch replacement
• High level alarm / Low-level alarm
• Truck / machine detection (ROM bins, Primary Crusher Dump Pockets)

Gladiator G1 Microwave Switch - Zimco

Gladiator G1 Microwave Switch

Hawk Measurement
In Stock

Features: The Gladiator Gen 1 Microwave Switch can be used for blockage detection, barrier detection, machine detection, and point level measurement, and detection of objects or material between two points.

• State of the art circular polarisation
• Simple sensitivity adjustment and calibration
• IECEx ta tb IIIC T* Da Db
• Theoretical range up to 300m (984ft)
• Simple
• 1-minute setup application presets
• Multiple Output & Communications Options

Industries:
• Mining & Metals
• Chemical
• Food & Beverage
• Oil & Gas
• Plastics
• Water & Wastewater

Hawk Gladiator G3 Microwave Switch - Zimco

Gladiator G3 Microwave Switch

Hawk Measurement
In Stock

Features: The Gladiator Gen 3 Microwave Switch can be used for blockage detection, barrier detection, machine detection, collision detection for protection, point level measurement, and detection of objects or material between two points.

• State of the art Circular transmission
• Backwards compatible with all Gladiator Microwave generations
• LCD push-button setup/diagnostics on the remote amplifier
• Simple sensitivity adjustment and calibration on Integral system
• Ranges up to 1200 meters (3937 ft)

Industries:
• Mining & Metals
• Chemical
• Food & Beverage
• Oil & Gas
• Plastics
• Water & Wastewater

Fiber Optic Sensing

Praetorian Fiber Optic Sensing Conveyor Health Monitoring System - Zimco

Praetorian Fiber Optic Sensing Conveyor Health Monitoring System

Hawk Measurement
In Stock

Features: The Praetorian Conveyor Health Monitoring System (CHMS) is a plant & site-wide single solution for detecting when critical parts of the idler are beginning to fail. The early detection warnings allow operators to control downtime and avoid catastrophic costly unplanned shutdowns. HAWK’s Praetorian Fiber Optic Sensing detects abnormalities in conveyor idler performance that other technologies cannot.

• Proven ROI by predicting breakages and failure BEFORE occurring
• Immune to the effects of a broken or cut fiber
• System is passive, no electricity is required in the field
• Self-diagnostics monitor the unitÍs condition and maintain optimum performance
• No maintenance or calibration require after commissioning
• Monitor up at 80km (50mi) at the same time.
• 24/7 real-time monitoring

Industries:
• Coal mines, hazardous area suitable (no infield electronics)
• Hard rock mines
• Quarries
• Buildings
• Unmanned material handling facilities
• Processing plant conveyors

Praetorian Fiber Optic Sensing for Perimeter Security and Threat Detection - Zimco

Praetorian Fiber Optic Sensing for Perimeter Security and Threat Detection

Hawk Measurement
In Stock

Features: The Praetorian Fiber Optic Sensing System can be installed along a fence or perimeter and can detect, identify and report any movements. This system has limitless applications and can be installed on anything from explosive storage areas to farms and ranches. The fast processing speed and pulse rate allow the Fiber Optic System to detect minute interferences that may otherwise go unnoticed. Some examples of detectable activates include intruder movement along a perimeter, intruders cutting or climbing a fence, vehicle movement along a perimeter, and digging, excavating, or trenching. The Fiber Optic Sensing system is crucial for keeping valuable assets secure and protected.

• No time splicing, allowing zero chance for an intruder to go unnoticed
• Immune to the effects of a broken or cut fiber
• Fiber optic sensing detects the exact location of the intruder
• Self-diagnostics monitor the unitÍs condition and maintain optimum performance
• No maintenance or calibration require after commissioning
• Monitor up at 80km (50mi) at the same time.
• 24/7 real-time monitoring

Industries:
• Army barracks
• Airports
• Prisons
• Explosive storage areas
• Country borders
• Hazardous areas
• Unmanned sites

Praetorian Fiber Optic Sensing for Pipeline Monitoring and Leak Detection - Zimco

Praetorian Fiber Optic Sensing for Pipeline Monitoring and Leak Detection

Hawk Measurement
In Stock

Features: The Praetorian Fiber Optic Sensing System can be installed on a buried or unburied pipeline and can immediately detect pipeline leakage, ground disturbances, manual and machine excavation, theft, hot tapping, and vehicle movement. The Fiber Optic System continually monitors large spans of the pipeline, looking for vibration and temperature changes. Once detection occurs, the system alerts the operator or security personal to the exact location of disturbance in the pipeline. This type of real-time intelligent monitoring is critical to operating efficiently and protecting valuable assets.

• Praetorian can function on applications where either the product is invisible (gas) or the pipeline cannot be visually inspected (buried).
• Immune to the effects of a broken or cut fiber
• Fiber optic sensing detects not only the presence of the leak but its specific location.
• Self-diagnostics monitor the unitÍs condition and maintain optimum performance
• No maintenance or calibration require after commissioning
• Monitor up at 80km (50mi) at the same time.
• 24/7 real-time monitoring

Industries:
• Oil (Crude or refined)
• Gas (any type)
• Chemical
• Mining tailings
• Water/wastewater
• Brine
• Slurries
• Steam

Praetorian Fiber Optic Sensing for Power Cable Monitoring - Zimco

Praetorian Fiber Optic Sensing for Power Cable Monitoring

Hawk Measurement
In Stock

Features: The Praetorian Fiber Optic Sensing System can monitor buried and unburied data cables, wires, and power transmission lines. Monitoring for wear, damage, or corrosion of the cable is extremely difficult and often power failure or data outage is the first sign of a problem. These cables are typically installed in areas that have multiple uses by various stakeholders and in the event of a failure can be logistically difficult and expensive to access for repair. The Praetorian Fiber Optic Sensing System can be installed either near the power cables or embedded within the power cable itself. It can monitor disturbances, identify manual and machine excavation, vehicle movement, ground condition assessment, and detects hotspots. HAWK’s Fiber Optic Sensing System requires no additional field infrastructure such as power or communication and does not require maintenance or calibration after commissioning.

• Detection of hot spots
• Conductor break detection
• Underground and Above ground Cable Monitoring
• Ground condition monitoring
• Detect issues as a distributed sensor rather than a point sensor
• Requires no additional field infrastructure such as power or communications
• 24/7 real-time monitoring
• Low cost per foot
• Preventative rather than reactive
• Autonomous detection with low false alarm rate

Industries:
• Mining and Minerals
• Utility Tunnels
• Transformers
• HVAC / HVDC
• Underground and Above ground Power Cables

Free Space Radar Level Transmitters

Hawk Senator 24C - Zimco

Senator S24C FMCW 24GHz Radar for Corrosive Liquids

Hawk Measurement
In Stock

Features: The Senator S24C FMCW 24GHz Radar Level Transmitter is designed specifically to measure agitated and corrosive liquids. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is ideal for measuring the level of corrosive liquids in agitated tanks.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 24 GHz transmitter (LPR and TLPR) for liquids
• Can measure in fast-moving processes (60 m/min / 196.85 ft/min)
• Flange plate protection and Drop antennas made of PTFE or PEEK for condensing and corrosive applications

Industries:
• Chemical market
• Oil & Gas
• Petrochemicals
• Power
• Steel

Hawk Senator 24L - Zimco

Senator S24L FMCW 24GHz Radar for Liquids

Hawk Measurement
In Stock

Features: The Senator S24L FMCW 24GHz Radar Level Transmitter is designed specifically to measure liquids in basic process applications. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is a market-entry transmitter that provides accurate readings in closed tanks, in the open air like rivers or dams, and even in fast-moving processes.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 24 GHz transmitter HART 7
• Small beam angle (5Á with DN150 / 6 PP Drop antenna)
• Flange plate protection and proven Drop antennas made of PP for condensing and corrosive applications
• Intuitive installation wizard for quick on-site set-up

Industries:
• Chemical market
• Oil & Gas
• Petrochemicals
• Power
• Steel

Hawk Senator 24S - Zimco

Senator S24S FMCW 24GHz Radar for Solids

Hawk Measurement
In Stock

Features: The Senator S24L FMCW 24GHz Radar Level Transmitter is designed specifically to measure solids from granulates to rocks. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of powders, granulates, rocks, cereals, and all other types of solids. It is ideal for measuring the level of solids from granulates to rocks.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 24 GHz transmitter HART 7
• Small beam angle (5° with DN150 / 6 PP Drop antenna)
• Flange plate protection and proven Drop antennas made of PP for condensing and corrosive applications
• Intuitive installation wizard for quick on-site set-up

Industries:
• Metals, Minerals & Mining
• Chemical market
• Power
• Agri-food
• Wastewater
• Pulp & Paper

Hawk Senator 24W - Zimco

Senator S24W FMCW 24GHz Radar for Liquids (Water and Wastewater Industry)

Hawk Measurement
In Stock

Features: The Senator S24W FMCW 24GHz Radar Level Transmitter is designed specifically to measure liquids in water and wastewater applications. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is a device that provides accurate readings in closed tanks, in the open air like rivers or dams, and can even measure volumetric flow rate.

• Accuracy is ±2 mm / ±0.08″
• Measuring Range is 20m/66ft
• Small beam angle
• 2-wire 4-20mA (HART®7)
• Maintenance-free concept
• Non-contacting level measurement

Industries:
• Water
• Wastewater

Hawk Senator 80H - Zimco

Senator S80H FMCW 80GHz Radar for Liquids with Hygienic Requirements

Hawk Measurement
In Stock

Features: The Senator S80H FMCW 80GHz Radar Level Transmitter is designed specifically to measure liquids with hygienic requirements. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is ideal for measuring the level of hygienic liquids with its PEEK Lens antenna and wide range of process connection options.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 80 GHz transmitter HART 7
• Can measure in fast-moving processes (60 m/min / 196.85 ft/min)
• Extensive choice of hygienic process connections
• Small dead zone and beam angle for small and narrow tanks

Industries:
• Pharmaceutical
• Food & beverage

Hawk Senator 80L - Zimco

Senator S80L FMCW 80GHz Radar for Liquids

Hawk Measurement
In Stock

Features: The Senator S80L FMCW 80GHz Radar Level Transmitter is designed specifically to measure liquids in narrow tanks with internal obstructions. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It has an empty spectrum function that filters false reflections caused by equipment inside the tank.

• Accuracy ±2 mm / ±0.08″
• Large measuring range from the antenna up to 100 m / 328 ft
• Small beam angle due to 80 GHz and process connections starting from thread
• PEEK Lens antenna insensitive to deposits

Industries:
• Oil & Gas
• Chemical market
• Environment
• Power

Hawk Senator 80P - Zimco

Senator S80P FMCW 80GHz Radar for Powders and Fines

Hawk Measurement
In Stock

Features: The Senator S80P FMCW 80GHz Radar Level Transmitter is designed specifically to measure powders and dusty atmospheres. This device is a non-contact radar level transmitter that uses FMCW technology. It measures distance, level and volume of powders, granulates, and other solids. It is ideal for measuring the level of solids in applications with very dusty atmospheres.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 80 GHz transmitter HART 7
• Extremely high dynamics with considerable signal-to-noise ratio for clear vision in dusty atmospheres
• Flush-mounted PEEK Lens antenna hence no intrusion into tank
• Easy installation due to small beam angles

Industries:
• Metals, Minerals & Mining
• Chemical market
• Power
• Agri-food
• Wastewater
• Pulp & Paper

Guided Wave Radar Transmitters

CGR Interface Level Measurement - Zimco

Centurion Guided Radar Level Transmitter

Hawk Measurement

Features: The Centurion Guided Radar (CGR) Level Transmitter is ideal for the measurement of liquids, sludge, powders, and granules to a range of 38m (124ft) for level and interface measurement. This technology is not affected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant, or coating of the probe. HAWK’s CGR is the first and only guided wave radar on the market to feature Power over Ethernet (PoE) communications. The advantages to PoE connectivity are secure in-plant and remote monitoring, as well as remote sensor setup, diagnostics, and troubleshooting abilities.

• Ability to accurately measure interface levels
• Continuous and precise measurement
• Hazardous rated for Gas & Dust with IECEx, FM, CSA & ATEX
• 4-20mA with HART 7 or Modbus Communications
• Up to 38m (124ft) range
• Auto-calibration to any dielectric 1.5
• Programmable fail-safe mode

Industries:
• Chemicals and Petrochemicals
• Oil and Gas
• Mining and Minerals
• Cement and Building Aggregates
• Food and Beverage
• Agriculture
• Wastewater

CGR Power Over Ethernet - Zimco

Centurion Guided Radar Level Transmitter – Power over Ethernet (PoE) Series

Hawk Measurement
In Stock

Features: The Centurion Guided Radar (CGR) Level Transmitter with Power over Ethernet (PoE) is ideal for level measurement of liquids, solids, bulk materials, sludge, powders, granules for Level and Interface to a distance of 38m (124ft). This technology is not affected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant or coating of the probe.

• Interface Level Measurement Option
• Up to 38m (124ft) Range
• Very Short Minimum Range (≤150mm, 6″)
• Cat 5 Ethernet Plug – No Special Wiring
• Auto-Calibration to Any Dielectric ≥ 1.5
• Adjustable Sensitivity
• Precise and Continuous Measurement
• Power and Communications via Ethernet
• Protection Class IP66, NEMA 4x

Industries:
• Chemicals and Petrochemicals
• Oil and Gas
• Mining and Minerals
• Cement and Building Aggregates
• Food and Beverage
• Agriculture
• Wastewater

Level + Flow

CGR Interface Level Measurement - Zimco

Centurion Guided Radar Level Transmitter

Hawk Measurement

Features: The Centurion Guided Radar (CGR) Level Transmitter is ideal for the measurement of liquids, sludge, powders, and granules to a range of 38m (124ft) for level and interface measurement. This technology is not affected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant, or coating of the probe. HAWK’s CGR is the first and only guided wave radar on the market to feature Power over Ethernet (PoE) communications. The advantages to PoE connectivity are secure in-plant and remote monitoring, as well as remote sensor setup, diagnostics, and troubleshooting abilities.

• Ability to accurately measure interface levels
• Continuous and precise measurement
• Hazardous rated for Gas & Dust with IECEx, FM, CSA & ATEX
• 4-20mA with HART 7 or Modbus Communications
• Up to 38m (124ft) range
• Auto-calibration to any dielectric 1.5
• Programmable fail-safe mode

Industries:
• Chemicals and Petrochemicals
• Oil and Gas
• Mining and Minerals
• Cement and Building Aggregates
• Food and Beverage
• Agriculture
• Wastewater

CGR Power Over Ethernet - Zimco

Centurion Guided Radar Level Transmitter – Power over Ethernet (PoE) Series

Hawk Measurement
In Stock

Features: The Centurion Guided Radar (CGR) Level Transmitter with Power over Ethernet (PoE) is ideal for level measurement of liquids, solids, bulk materials, sludge, powders, granules for Level and Interface to a distance of 38m (124ft). This technology is not affected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant or coating of the probe.

• Interface Level Measurement Option
• Up to 38m (124ft) Range
• Very Short Minimum Range (≤150mm, 6″)
• Cat 5 Ethernet Plug – No Special Wiring
• Auto-Calibration to Any Dielectric ≥ 1.5
• Adjustable Sensitivity
• Precise and Continuous Measurement
• Power and Communications via Ethernet
• Protection Class IP66, NEMA 4x

Industries:
• Chemicals and Petrochemicals
• Oil and Gas
• Mining and Minerals
• Cement and Building Aggregates
• Food and Beverage
• Agriculture
• Wastewater

Hawk Gladiator Acoustic Switch - Zimco

Gladiator Acoustic Switch

Hawk Measurement
In Stock

Features: The Gladiator Acoustic Switch can be used for blockage detection, barrier detection, machine detection/protection, and point level measurement, and detection of objects or material between two points.

• No contact with the product required
• Self-cleaning transducers
• Heavy-duty titanium version available
• Designed for dusty, wet environments
• LCD setup/diagnostics on the remote amplifier
• Simple
• 1-minute setup

Industries:
• Blocked chute detection in wet or dry environments
• Wet screen blocked chute detection
• Nucleonic / tilt switch replacement
• High level alarm / Low-level alarm
• Truck / machine detection (ROM bins, Primary Crusher Dump Pockets)

Gladiator G1 Microwave Switch - Zimco

Gladiator G1 Microwave Switch

Hawk Measurement
In Stock

Features: The Gladiator Gen 1 Microwave Switch can be used for blockage detection, barrier detection, machine detection, and point level measurement, and detection of objects or material between two points.

• State of the art circular polarisation
• Simple sensitivity adjustment and calibration
• IECEx ta tb IIIC T* Da Db
• Theoretical range up to 300m (984ft)
• Simple
• 1-minute setup application presets
• Multiple Output & Communications Options

Industries:
• Mining & Metals
• Chemical
• Food & Beverage
• Oil & Gas
• Plastics
• Water & Wastewater

Hawk Gladiator G3 Microwave Switch - Zimco

Gladiator G3 Microwave Switch

Hawk Measurement
In Stock

Features: The Gladiator Gen 3 Microwave Switch can be used for blockage detection, barrier detection, machine detection, collision detection for protection, point level measurement, and detection of objects or material between two points.

• State of the art Circular transmission
• Backwards compatible with all Gladiator Microwave generations
• LCD push-button setup/diagnostics on the remote amplifier
• Simple sensitivity adjustment and calibration on Integral system
• Ranges up to 1200 meters (3937 ft)

Industries:
• Mining & Metals
• Chemical
• Food & Beverage
• Oil & Gas
• Plastics
• Water & Wastewater

Hawk MiniWave Ultrasonic Level Transmitter - Zimco

MiniWave Ultrasonic Level Transmitter

Hawk Measurement
In Stock

Features: The MiniWave is a compact, loop-powered ultrasonic level transmitter for continuous measurement of liquids. As a price leader, it does not compromise on good value; and provides effortless and intuitive operation. Easy and flexible mounting combined with high chemical compatibility and a 12m (40ft) measuring range makes the MiniWave suitable in multiple applications in all industries.

• 2 wire 4-20mA with HART
• Maximum range to 12m (40ft)
• Non-contact measurement
• Low cost per measuring point
• Auto compensation for steam and signal losses

Industries:
• River level
• Wet wells
• Inlet screens
• Tanks
• Sumps

Hawk Ranger One Ultrasonic Level Transmitter - Zimco

Ranger One Ultrasonic Level Transmitter

Hawk Measurement
In Stock

Features: The Ranger One ultrasonic level transmitter has a maximum range of 4.3m (14 ft). The Ranger One is an ideal solution for position or distance measurement in factory automation like web control or heavy equipment monitoring as well as solids level remote monitoring on anything from corn flakes to sawdust. Its fully submersible, corrosion-resistant, shock-resistant ultrasonic sensors are housed in 316 stainless steel and all-around tough.

• Long range, short dead band
• Unaffected by optical factors like color and transparency
• PC or button “teachable” setup
• Narrow beam adjustments to optimize performance
• Temperature compensated
• Quick mounting

Industries:
• Agriculture
• Iron
• Minerals & Mining
• Power & Energy
• Pulp & Paper

Hawk Ranger Plus Ultrasonic Level Transmitter - Zimco

Ranger Plus Ultrasonic Level Transmitter

Hawk Measurement
In Stock

Features: The Ranger Plus LTRP Ultrasonic Level Transmitter provides non-contact level measurement up to 3m (10 ft) and features 3 analog outputs and 2 switches. Precision monitoring for liquid applications, from wastewater to refined chemicals.

• Unaffected by optical factors like color and transparency
• Computer (PC) software allows remote adjustment
• Standard RS-485 Serial Interface
• Durable housing for long life
• Threaded at both ends

Industries:
• Agriculture
• Iron
• Minerals & Mining
• Power & Energy
• Pulp & Paper

Hawk Senator 24C - Zimco

Senator S24C FMCW 24GHz Radar for Corrosive Liquids

Hawk Measurement
In Stock

Features: The Senator S24C FMCW 24GHz Radar Level Transmitter is designed specifically to measure agitated and corrosive liquids. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is ideal for measuring the level of corrosive liquids in agitated tanks.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 24 GHz transmitter (LPR and TLPR) for liquids
• Can measure in fast-moving processes (60 m/min / 196.85 ft/min)
• Flange plate protection and Drop antennas made of PTFE or PEEK for condensing and corrosive applications

Industries:
• Chemical market
• Oil & Gas
• Petrochemicals
• Power
• Steel

Hawk Senator 24L - Zimco

Senator S24L FMCW 24GHz Radar for Liquids

Hawk Measurement
In Stock

Features: The Senator S24L FMCW 24GHz Radar Level Transmitter is designed specifically to measure liquids in basic process applications. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is a market-entry transmitter that provides accurate readings in closed tanks, in the open air like rivers or dams, and even in fast-moving processes.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 24 GHz transmitter HART 7
• Small beam angle (5Á with DN150 / 6 PP Drop antenna)
• Flange plate protection and proven Drop antennas made of PP for condensing and corrosive applications
• Intuitive installation wizard for quick on-site set-up

Industries:
• Chemical market
• Oil & Gas
• Petrochemicals
• Power
• Steel

Hawk Senator 24S - Zimco

Senator S24S FMCW 24GHz Radar for Solids

Hawk Measurement
In Stock

Features: The Senator S24L FMCW 24GHz Radar Level Transmitter is designed specifically to measure solids from granulates to rocks. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of powders, granulates, rocks, cereals, and all other types of solids. It is ideal for measuring the level of solids from granulates to rocks.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 24 GHz transmitter HART 7
• Small beam angle (5° with DN150 / 6 PP Drop antenna)
• Flange plate protection and proven Drop antennas made of PP for condensing and corrosive applications
• Intuitive installation wizard for quick on-site set-up

Industries:
• Metals, Minerals & Mining
• Chemical market
• Power
• Agri-food
• Wastewater
• Pulp & Paper

Hawk Senator 24W - Zimco

Senator S24W FMCW 24GHz Radar for Liquids (Water and Wastewater Industry)

Hawk Measurement
In Stock

Features: The Senator S24W FMCW 24GHz Radar Level Transmitter is designed specifically to measure liquids in water and wastewater applications. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is a device that provides accurate readings in closed tanks, in the open air like rivers or dams, and can even measure volumetric flow rate.

• Accuracy is ±2 mm / ±0.08″
• Measuring Range is 20m/66ft
• Small beam angle
• 2-wire 4-20mA (HART®7)
• Maintenance-free concept
• Non-contacting level measurement

Industries:
• Water
• Wastewater

Hawk Senator 80H - Zimco

Senator S80H FMCW 80GHz Radar for Liquids with Hygienic Requirements

Hawk Measurement
In Stock

Features: The Senator S80H FMCW 80GHz Radar Level Transmitter is designed specifically to measure liquids with hygienic requirements. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It is ideal for measuring the level of hygienic liquids with its PEEK Lens antenna and wide range of process connection options.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 80 GHz transmitter HART 7
• Can measure in fast-moving processes (60 m/min / 196.85 ft/min)
• Extensive choice of hygienic process connections
• Small dead zone and beam angle for small and narrow tanks

Industries:
• Pharmaceutical
• Food & beverage

Hawk Senator 80L - Zimco

Senator S80L FMCW 80GHz Radar for Liquids

Hawk Measurement
In Stock

Features: The Senator S80L FMCW 80GHz Radar Level Transmitter is designed specifically to measure liquids in narrow tanks with internal obstructions. This device is a non-contact radar level transmitter that uses FMCW technology. It measures the distance, level, and volume of liquids and pastes. It has an empty spectrum function that filters false reflections caused by equipment inside the tank.

• Accuracy ±2 mm / ±0.08″
• Large measuring range from the antenna up to 100 m / 328 ft
• Small beam angle due to 80 GHz and process connections starting from thread
• PEEK Lens antenna insensitive to deposits

Industries:
• Oil & Gas
• Chemical market
• Environment
• Power

Hawk Senator 80P - Zimco

Senator S80P FMCW 80GHz Radar for Powders and Fines

Hawk Measurement
In Stock

Features: The Senator S80P FMCW 80GHz Radar Level Transmitter is designed specifically to measure powders and dusty atmospheres. This device is a non-contact radar level transmitter that uses FMCW technology. It measures distance, level and volume of powders, granulates, and other solids. It is ideal for measuring the level of solids in applications with very dusty atmospheres.

• Accuracy ±2 mm / ±0.08″
• 2-wire loop-powered 80 GHz transmitter HART 7
• Extremely high dynamics with considerable signal-to-noise ratio for clear vision in dusty atmospheres
• Flush-mounted PEEK Lens antenna hence no intrusion into tank
• Easy installation due to small beam angles

Industries:
• Metals, Minerals & Mining
• Chemical market
• Power
• Agri-food
• Wastewater
• Pulp & Paper

Hawk Sultan Acoustic Wave Level Transmitter POE - Zimco

Sultan Acoustic Wave Level Transmitter – Power over Ethernet (PoE) Series

Hawk Measurement
In Stock

Features: The Sultan Acoustic Wave Level Transmitter with Power over Ethernet (PoE) is ideal for level, flow, positioning and collision protection to a distance of 60m (196ft) or up to 180m (588ft) for extended ranges. HAWK is the only company on the market to offer PoE connectivity for Acoustic Wave Level Measurement. This rugged, self-cleaning sensor requires zero maintenance and is ideal for measuring the level of liquids, slurries, and solids. The combination of low frequency, high power, and signal processing (Adaptive Gain Technology) creates one of the world’s most reliable level devices available on the market.

• Non-contact measurement
• High Power even with two-wire loop supply
• Low cost per point
• Wide range of communications: GosHawk, HART, Modbus, Profibus PA, Profibus DP, Foundation Fieldbus, DeviceNet, Modbus over Ethernet TCP/IP, Wi-Fi, PoE
• Pump Control x5 pumps
• Auto compensation for dust, steam, and losses
• Protection class IP67, NEMA 4x (IP68 Transducer)
• Programmable fail-safe mode
• 3G remote setup options / configuration
• Differential and average level control (2 transducers).

Industries:
• Water / Wastewater (River Level, Wet Wells, Inlet Screens, Tanks, Sumps, Pump Stations, Water Towers, Dams, Basin Levels, and Chemical Storage)
• Mining (Crushers, Surge Bins, Ore Passes, Conveyor Profile, Blocked Chute, Stockpile, Stackers, Reclaimers, Storage Silos, etc.)
• Power Stations (Boiler Bunkers, Raw Coal Bunkers, Ash Pits, Fly Ash Silos, etc.)
• Others (Food, Cement, Plastics, Grain, Chemicals, Paper, Irrigation, and Quarries)

Hawk Sultan Non-Contact Acoustic Wave Series - Zimco

Sultan Non-Contact Acoustic Wave Series

Hawk Measurement
In Stock

Features: The Sultan is a powerful non-contact Acoustic Wave transmitter for level, flow, positioning, and collision protection. This self-cleaning sensor requires zero maintenance and is ideal for measuring the level of liquids, slurries, and solids. The combination of low frequency, high power, and signal processing (Adaptive Gain Technology) creates one of the world’s most reliable level devices available on the market.

• Self-cleaning sensor face requires no maintenance
• Non contact measurement
• High power even with a two-wire loop supply
• Wide range of communications: Power over Ethernet (PoE), GosHawk, HART, Modbus, Profibus PA, Profibus DP, Foundation Fieldbus, DeviceNet, Modbus over Ethernet TCP/IP, Wi-Fi
• Programmable fail-safe mode

Industries:
• Mining
• Water / Wastewater
• Power Stations
• Chemicals
• Plastics
• Food and Beverage

Real-time Fluid Identification

AlarmID - Zimco
In Stock

Features: The Alarm-ID™ is a tank overfill and underfill protection system. This PST patented technology provides an alarm point when the identified liquid passes the sensor level either up or down. ​A series of Alarm-ID™ Units can be installed at key levels on the outside of tanks. The tank contents and even vacancy can be detected and alerts are activated in real-time 24/7.

• Non-intrusive design, installed on the outside of the tank
• Quick installation (typically less than 30 minutes)
• Wireless communications available per the new API 2350 specification
• Bluetooth, WiFi, and LoRa communication options
• Compliant with New API 2350 specification for independent alarm overflow protection
• Instrisically safe design
• Separate power and communications from the primary level sensing system

Industries:
• Oil and Gas
• Chemicals and Petrochemicals
• Water / Wastewater
• Power Stations
• Food and Beverage
• Agriculture

Hawk Portable ID - Zimco
In Stock

Features: The Portable-ID™ is a portable sensor capable of identifying liquids and diagnosing process problems inside of closed containers or pipes both on land and subsea operations.

• Non-intrusive design, installed on the outside of the vessel, pipe, tank, etc.
• Portable for rapid readings that provide real-time liquid material identification
• Detection of foreign materials embedded in containers such as non-compliant materials, explosives, etc.
• Extensive and accurate resident database provides exact liquid matching
• Portable, lightweight, and rugged design for the elements

Industries:
• Chemicals and Petrochemicals
• Oil and Gas
• Water / Wastewater
• Power Stations
• Food and Beverage
• Agriculture

Transmix ID - Zimco
In Stock

Features: The Transmix-ID™ is a clamp-on sensor capable of detecting and identifying liquid interfaces in flowing pipelines. The Transmix-ID™ technology is so revolutionary, it can decipher the difference between 87 Octane Gas and JP-8 Fuel when both liquids are flowing through a pipe. The non-intrusive unit can fit any size pipe or container and is independently powered. The Transmix-ID™ is equipped with WiFi, Cellular, or Satellite communications (or any combination thereof). The cloud-based monitoring portal identifies the liquid flowing through the pipeline and reports issues in real-time to even the most remote areas.

• Non-intrusive design, installed on the outside of the vessel, pipe, tank, etc.
• Large ROI (1x-5x) with up to 50% transmix waste reduction and huge savings in operational downtime
• Intrinsically safe design
• Capital purchase or lease options available
• WiFi, Cellular, and Satellite Options
• Real-time transmix interface information
• Small footprint (wraps outside of pipe)
• Low power (battery or hard-wired)

Industries:
• Oil and Gas
• Chemicals and Petrochemicals
• Water / Wastewater
• Power Stations
• Energy

Ultrasonic Level Transmitters

Hawk MiniWave Ultrasonic Level Transmitter - Zimco

MiniWave Ultrasonic Level Transmitter

Hawk Measurement
In Stock

Features: The MiniWave is a compact, loop-powered ultrasonic level transmitter for continuous measurement of liquids. As a price leader, it does not compromise on good value; and provides effortless and intuitive operation. Easy and flexible mounting combined with high chemical compatibility and a 12m (40ft) measuring range makes the MiniWave suitable in multiple applications in all industries.

• 2 wire 4-20mA with HART
• Maximum range to 12m (40ft)
• Non-contact measurement
• Low cost per measuring point
• Auto compensation for steam and signal losses

Industries:
• River level
• Wet wells
• Inlet screens
• Tanks
• Sumps

Hawk Ranger One Ultrasonic Level Transmitter - Zimco

Ranger One Ultrasonic Level Transmitter

Hawk Measurement
In Stock

Features: The Ranger One ultrasonic level transmitter has a maximum range of 4.3m (14 ft). The Ranger One is an ideal solution for position or distance measurement in factory automation like web control or heavy equipment monitoring as well as solids level remote monitoring on anything from corn flakes to sawdust. Its fully submersible, corrosion-resistant, shock-resistant ultrasonic sensors are housed in 316 stainless steel and all-around tough.

• Long range, short dead band
• Unaffected by optical factors like color and transparency
• PC or button “teachable” setup
• Narrow beam adjustments to optimize performance
• Temperature compensated
• Quick mounting

Industries:
• Agriculture
• Iron
• Minerals & Mining
• Power & Energy
• Pulp & Paper

Hawk Ranger Plus Ultrasonic Level Transmitter - Zimco

Ranger Plus Ultrasonic Level Transmitter

Hawk Measurement
In Stock

Features: The Ranger Plus LTRP Ultrasonic Level Transmitter provides non-contact level measurement up to 3m (10 ft) and features 3 analog outputs and 2 switches. Precision monitoring for liquid applications, from wastewater to refined chemicals.

• Unaffected by optical factors like color and transparency
• Computer (PC) software allows remote adjustment
• Standard RS-485 Serial Interface
• Durable housing for long life
• Threaded at both ends

Industries:
• Agriculture
• Iron
• Minerals & Mining
• Power & Energy
• Pulp & Paper

View Cart