CEJN’s produces quick connect couplings and nipples for compressed air, gas, breathing air, fluids and hydraulic oil. CEJN products are used in agriculture, automotive, construction, offshore, medical, marine, transportation, wind power and rescue industries.

Breathing Air Hoses & Quick Connects

Breathing Air Hoses & Couplers

CEJN

Features: CEJN Breathing Air couplings have a high-flow rate, a broad connection range and require only minimal force to connect. With the vital function of supplying breathing air, the need for safety and reliability is of the utmost importance. CEJN’s products are designed and manufactured to exacting standards, which has resulted in years of trouble-free service. Presented here are CEJN’s couplings and nipples, hoses, hose kits and accessories for breathing air applications.

Material: Chrome-plated brass
Seal material: nBr
Water flow at pressure drop 4 bar (58 PSI): 3.5 l/min (0.9 GPM US)
Air flow at inlet pressure 6 bar (87 PSI) and pressure drop 0.5 bar (7 PSi): 86 l/min (3 CFM)
Max. working pressure: 10 bar (145 PSi)
Min. burst pressure: 40 bar (580 PSi)
temperature range: -30°C to +100°C (-22°F to +212°F)
Nominal flow diameter: 2.5 mm (3/32″)

Fluid Hose, Couplings + Accessories

Fluid Hoses & Couplers

CEJN
In Stock

Features: Fluid products must be leak free, able to quickly connect and disconnect, able to withstand the transferred media and to endure the operating conditions to which they are subjected. CEJN’s Fluid products encompass all of these necessities. Our fluid couplers and nipples are available in valved and valveless designs for low- and medium- pressure applications. Presented here are fluid couplings and nipples, hoses and hose kits for fluid applications.

material: Chrome-plated brass
Flow capacity at 4 bar
pressure drop: 3.5 l/min (0.77 GPM UK)
Max. working pressure: 10 bar (145 PSI)
Min. burst pressure: 40 bar (580 PSI)
temperature range: -30°C to +100°C (-22°F to +212°F)
Nominal flow diameter: 2.5 mm (3/32″)
Kv (Cv): 0.10 (0.12)

High Pressure Hydraulic Hose + Accessories

High Pressure Couplings

CEJN
Best Seller
In Stock

Features: CEJN has over 40 years of experience in quick connect coupling technology for high-pressure hydraulics and offers a wide range of products with operating pressures up to 43,500 PSI (3000 bar), CEJN High-Pressure Hydraulic couplings are specially designed for ultra high pressure pumps, rescue equipment and other demanding applications. Presented here are couplings and nipples, hoses, pressure gauges and porting blocks for high-pressure hydraulic applications.

Nominal flow diameter 2.5 mm (3/32″)
Flow capacity 4.6 l/min (1.0 GPM UK)
Max. working pressure 300.0 MPa
Min. burst pressure 600.0 MPa
Temperature range -20°C – +80°C (-4°F – +176°F)
Material coupling Hardened black finish steel
Material nipple Hardened black finish steel
Material seal Nitrile (NBR) other sealing materials on request

High Pressure Hose

CEJN
Best Seller

Features: The CEJN High-pressure hose is a spiralized steel reinforced polymer hose that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kinkresistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing.

• Ultra-high working pressures
• Maintained flexibility through entire service life
• Low volumetric expansion
• Smooth inner bores
• Kink-resistant steel-reinforced construction
• Abrasion-resistant covers
• Small outside diameter
• Superior chemical resistance

Alert Ring

CEJN

Features: CEJN Alert Ring
– Visual safeguards to ensure proper connection

In rough and stressful work environments there is always a risk that the coupling may not be completely connected, CEJN alert ring is a visual safeguard to ensure proper connection. If the red ring is visible, the coupling isn’t connected.

Hydraulic Couplings

Hydraulic Couplings

CEJN
In Stock

Features: CEJN Hydraulic couplings are suitable for applications with operating pressures reaching up to 10,153 PSI (700 bar). By using CEJN Hydraulic couplings, pollution through hydraulic fluid leakage is reduced and helps to protect the environment from harm. Presented here are couplings, nipples, and pressure testing systems for all types of hydraulic applications.

04 Series X65 – Steel
Flat-Face couplings & nipples in 7 body sizes. Meets and exceeds the demands in the ISO 16028 Standard. Made of plated steel with a working pressure of up to 500 bar.
11 Series X66 – Stainless Steel
Flat-Face couplings & nipples in 4 body sizes. Dimensionally in accordance with the ISO 16028 Standard. Made of stainless steel with a working pressure of up to 250 bar.
15 Series X64 – Pressure Relief
Flat-Face nipples with pressure eliminator in 5 body sizes. Interchangeable with all ISO 16028 couplings. Made of plated steel with a working pressure of up to 500 bar.
21 Classic Range
CEJN’s classic couplings & nipples in 4 body sizes. Made of plated steel and plated brass/steel with a working pressure of up to 320 bar.

Hydraulic Multi-Hose Connectors

Multi-X Connector

CEJN

Features: CEJN Multi-X allows you to
• Minimize downtime during tool changes
• Connect the hydraulic lines with residual pressure
• Install multi-plates in confined spaces
• Use working pressure up to 35 MPa
• Eliminate cross connection

Max. working pressure……………….35 MPa
Min. burst pressure…………………….120 MPa
Temperature range……………………..-30°C to +100°C (-22°F to +212°F)
Material female plate…………………..Zinc plated steel, anodized aluminum, zinc, brass
Material male plate……………………..Zinc plated steel, anodized aluminum, brass
Material seal……………………………….Nitril (NBR)
Disconnection under pressure……To be avoided. Residual pressure can result in recoil effect during disconnection. Always grip the lever firmly.
Comment……………………………………Contact CEJN technical support for recommendations for high impulse applications.

Hydraulic Swivels

Swivel Connectors

CEJN

Features: Available from CEJN are swivel connections for high-pressure hydraulic applications. The swivels are especially suitable for use in confined areas and for bolt tensioner tools, torque wrenches, cylinders, bearing pullers etc. The swivel connections offer increased flexibility for hose kits and their swivel function allow a 360° movement up to full working pressure. This ensures that no twist or torque is transferred to the hose. As a result, the hoses’ service life is prolonged and the handling is made easier for the operator.

Material………………………………………………..Hardened, zinc plated steel
Max. working pressure…………………………1,500 bar (21,750 PSI)
Min. burst pressure………………………………3,000 bar (43,500 PSI)
Max. number of pressure cycles……………100,000*
Nominal flow diameter………………………….2.5 mm (3/32”)
Temperature range……………………………….-30°C to +100°C (-20°F to +210°F)
Flow capacity at pressure drop 4 bar…….6.0 l/min (1.47 GPM US)

Pneumatic Hose, Couplings + Accessories

Pneumatic Hose & Couplings

CEJN
In Stock

Features: CEJN’s Pneumatic product line includes the world’s best-performing quick connect couplings, blowguns, polyurethane hoses, lightweight and heavy-duty hoses, cable reels and accessories. CEJN offers all the necessary components, from FRL units to compressed air couplings, to ensure reliable compressed air performance worldwide.

Nominal flow diameter 5.3 mm (7/32″)
Air flow 950 l/min (33.5 CFM)
Max. working pressure 16 bar (230 PSI)
Min. burst pressure 140 bar (2030 PSI)
Connection force 86 N
Temperature range -20°C – +100°C (-4°F – +212°F)
Material coupling Zinc-plated steel/brass
Material nipple Hardened zinc-plated steel
Interchangeable with Atlas Copco QIC8, Parker Rectus 23/24, Parker Tema 1400/1423,
Prevost ISC06/ISI06, Foster 3003, Oetiker B1, Hansen 3000

View Items