Liquiflo offers American-made pumps using a positive displacement lobe design. This exclusive design is self-priming, non-cavitating with “run-dry” capabilities. Available in 1 1/2″, 2″, 3″ & 4″ connections, with flow rates up to 600 GPM. Capable of pumping a wide spectrum of liquids, it is available for portable or stationary applications. In addition, Liquiflo boasts a full suite of gear and centrifugal pumps for any applications.

Centrifugal Pump

Liquiflo Centry Series Centrifugal Pump

Centry Series – Sub-ANSI Centrifugal Pumps

Liquiflo

Features: Liquiflo’s Centry® Pumps are Sealed and Magnetically-Coupled (MC) centrifugal pumps engineered and manufactured for the user with increased needs for equipment reliability. These pumps are specifically designed to handle the lower flow applications that create maintenance problems for standard ANSI pumps operating at less than BEP. The Centry Series pumps can handle flows up to 160 GPM and heads up to 100 ft.

They are available in 316 Stainless Steel or Alloy-C* constructions, and with threaded or flanged port configurations.

Liquiflo Endura Series Centrifugal Pump

Endura Series – ANSI Group I & II Centrifugal Pumps

Liquiflo

Features: Liquiflo’s Endura® Pumps are Group I & Group II ANSI-Dimensional Magnetically-Coupled (MC) centrifugal pumps. These pumps were designed to meet the demanding needs of the chemical processing industry and will also handle many challenging pumping applications, such as those which require dry-running, pumping slurries or high-temperature demands. The Endura Series pumps cover flows up to 770 GPM and heads up to 420 ft.

They are available in 316 Stainless Steel or Alloy-C* constructions, and with flanged port configurations.

Fluid Transfer

Fluid Transfer Pump 150 & 200

Liquiflo

Features: FTS Fluid Transfer Solutions feature a patented Tri-Lobe positive displacement impeller. This technology provides dry-run capability, dry suction lift, and high flow performance unique to other styles. Pumps are available in multiple configurations such as a hat channel skid, providing a sturdy lightweight platform allowing easy access to the pump head. This configuration can be used as a stationary or mobile pump. Flow rates range between 10 and 175 GPM that pushes up to 150 PSI. The FTS can pump a range of fluids with typical applications in fuels, oils, and lubes.

Head Size Motor Options

1.5″
2.0″

1.5 HP / 60 Hz / 1 PH / 115-230 VAC
2.0 HP / 60 Hz / 1 PH / 115-230 VAC
3.0 HP / 60 Hz / 1 PH / 230 VAC
5.0 HP / 60 Hz / 1 PH / 208-230 VAC
7.5 HP / 60 Hz / 1 PH / 208-230 VAC

2.0 HP / 60 Hz / 3 PH / 230-460 VAC
3.0 HP / 60 Hz / 3 PH / 230-460 VAC
5.0 HP / 60 Hz / 3 PH / 230-460 VAC
7.5 HP / 60 Hz / 3 PH / 230-460 VAC
10 HP / 60 Hz / 3 PH / 230-460 VAC

Explosion-proof motor options are available.
Pump units can be manifolded to support increased flow rates.

Fluid Transfer Pump 300 & 400

Liquiflo

Features: FTS Fluid Transfer Solutions 3″ and 4″ utilizes a unique two-stage design to offer continuous dry-run capability with self-priming suction and reversible flow. The first stage centrifugal impeller provides an effective boost to the suction capability of the second-stage positive displacement lobe pump. This particular design allows the FTS-Series pumps to resist cavitation while delivering high-volume flow even when pumping fluids with high vapor pressure. Hydraulic and Diesel driven motor options are available.

Head Size Motor Options

3.0″
4.0″

20 HP / AC10 230 VAC / AC10 460 VAC
24 HP / AC30 460 VAC
30 HP / AC30 460VAC
60 HP option available for 4″ pump only

Explosion-proof motor options are available.
Pump units can be manifolded to support increased flow rates.

Gear Pumps

Liquiflo H Series Gear Pump

H-Series – Heavy Duty Industrial Gear Pump

Liquiflo
Best Seller

Features: The H-Series Gear Pumps were designed as an upgrade to Liquiflo’s original 3-Series. With similar outside dimensions and capacities, the H-Series incorporates larger diameter shafts and bearings, allowing them to handle higher pressures with extended service life. H-Series pumps are available in Sealed and Mag-Drive versions with flows up to approximately 55 GPM and differential pressures up to 225 PSI with 300 PSI possible on some models.

Flows up to 55 GPM
Differential Pressures up to 225 PSI
Viscosities from 0.3 to 100,000+ cP
316 SS or Alloy-C Basic Construction
Packing, Single Mechanical Seal, Double Mechanical Seal or Mag-Drive
Closed-Coupled or Long-Coupled
12 Models Offered

Liquiflo Series 2 Gear Pump

2 Series – Ultra Low Flow Gear Pump

Liquiflo

Features: The 2-Series Gear Pumps were designed for low flow applications. Their compact and rugged design makes them ideal for many applications, including chemical dosing and metering, pipeline sampling and wastewater treatment.

Flows up to 30 GPH
Pressures up to 225 PSI
316 SS
2 Models offered

Liquiflo 3 Series Gear Pump

3 Series – Standard Duty Gear Pump

Liquiflo

Features: Liquiflo’s original 3-Series Gear Pumps are available in Sealed and Mag Drive versions with flows up to approximately 55 GPM and differential pressures up to 100 PSI.

Flows up to 55 GPM
Pressures up to 100 PSI
316 SS, Alloy-C or Alloy-20
11 Models Offered

Liquiflo Max Series Gear Pump

Max Series® – High Pressure Gear Pump

Liquiflo

Features: The Max® Series Gear Pumps feature helical gears and relieved wear plates for smoother and quieter operation and intrinsic reduction of gear separation forces. Their unique and durable design will ensure extended life in high-pressure pumping applications.

Flows up to 20 GPM
Pressures up to 350 PSI
316 SS or Titanium
9 Models Offered

Liquiflo P Series Gear Pump

P Series – Fluoropolymer-Lined Stainless Steel Gear Pump

Liquiflo

Features: The Poly-Guard® Series Gear Pumps were designed to handle the most corrosive chemicals, such as inorganic acids, alkalis and salts. All internal components and surfaces are non-metallic, which makes the Poly-Guard pump an excellent choice for high-purity services.

Flows up to 25 GPM
Pressures up to 100 PSI
303 SS/PFA-Lined
9 Models Offered

View Items