For more than 55 years Flomore has provided positive displacement chemical injection pumps for the Oil & Gas industry, including an advanced technology solar pump model. Integrated systems allow for remote access to record and transmit pump, chemical usage, and well/pipeline data through a SCADA system. Flomore Pumps provide continuous injection on electric and solar pumps – a feature that is key in injecting toxic hydrogen sulfide (H2S) scavenger to remove or reduce the toxic and corrosive H2S found in natural gas.

A selection of O-ring and packing materials allows customers to use these pumps with a variety of chemicals used in various industries. Flomore Pumps are equipped to handle the challenges of Oil & Gas Production, Gas Pipeline, Industrial, Water Treatment and Chemical Processing applications.

Electric Driven Pumps

Series 3500 Electric Driven Injection Pump

Flomore
Best Seller
In Stock

Features: Flomore Series 3500 chemical injection pumps are electric driven, positive displacement pumps utilizing C-faced motors and common gear reducers. The gear reducers are available in 15, 30, 60, and 120 strokes per minute configurations. By utilizing even further flexibility of a wide variety of plunger sizes, the Series 2500 can fill many application requirements of different flows and pressures.
The Series 3500 can have up to four, flow adjustable heads while running fluid ends.
OPTIONS: Ceramic plungers, which provide longer packing life, and a wide variety of packing are designed to meet the demands of many different chemical applications.

■ Maximum discharge pressure: 6,000 psi (414 bar) with 3/16” plunger
■ Maximum volume 139 gallons per day per head (528 liters per day) with 1/2” plunger
■ Each head is adjustable while running
■ Available simplex, duplex, triplex, or quadruplex configurations
■ Mix or match head sizes – pump the same or different chemicals
■ Available in four-stroke rates: 15, 30, 60, or 120 strokes per minute
■ Each head is independently coupled and easy to maintain in the fi eld
■ 1 or 3 phase, TEFC or explosion-proof, 50 or 60 Hz motors available
■ Available with 3/16”, 1/4”, 3/8”, or 1/2” plunger

Head Size Model PSI Volume Range LPD

3/16″
3/16″
3/16″
3/16″
1/4″
1/4″
1/4″
1/4″
3/8″
3/8″
3/8″
3/8″
1/2″
1/2″
1/2″
1/2″

35H4
35G4
35F4
35E4
35H1
35G1
35F1
35E1
35H3
35G3
35F3
35E3
35H5
35G5
35F5
35E5

6,000
6,000
6,000
4,000
3,200
4,000
4,000
2,100
1,450
1,800
1,700
950
820
1,025
1,000
525

0.76 to 9.08
1.89 to 18.55
3.79 to 37.1
7.19 to 70.79
1.51 to 16.28
3.41 to 32.55
6.44 to 65.49
13.25 to 130.98
3.79 to 37.1
7.57 to 74.19
14.76 to 148.39
29.53 to 297.15
6.44 to 65.87
13.25 to 131.73
26.5 to 263.84
52.62 to 528.06

Flomore 4400 Electric Driven Injection Pump

Series 4400 Electric Driven Injection Pump

Flomore
Best Seller
In Stock

Features: The Series 4400 pump utilizes an integral worm gear drive available in three different standard ratios and six plunger sizes to provide a wide selection of flows and pressures.

■ Positive Displacement
■ Up to 8 pumping heads driven by a single motor
■ Each pumping head capacity is fi eld adjustable 0 to 100% while running
■ Oil bath lubrication for long gear box life

Head Size Model Pressure Volume Range LPD

3/16″

1/4″

3/8″

1/2″

3/4″

1″

4424
4414
4434
4421
4411
4431
4423
4413
4433
4425
4415
4435
4526
4516
4536
4527
4517
4537

5,000
5,000
5,000
2,400
2,400
2,400
1,200
1,200
1,200
600
600
600
300
300
300
150
150
150

0.24 to 9.46
0.49 to 18.93
0.95 to 37.85
1.89 to 18.93
3.79 to 37.85
7.57 to 75.71
4.54 to 54.42
8.71 to 87.06
17.41 to 174.13
7.95 to 79.49
15.14 to 151.42
30.28 to 302.83
17.41 to 174.13
34.45 to 344.47
68.89 to 688.94
30.66 to 306.62
61.7 to 617.02
123.03 to 1230.26

Series 3400 Electric Driven Injection Pump

Flomore
In Stock

Features: The Series 3400 electric driven injection pump utilizes C-faced motors and common gear reducer available in two speeds of 30 or 60 strokes per minute.

■ Maximum discharge pressure: 4,000 psi (276 bar) with 1/2” plunger
■ Maximum volume: 1760 GPD (6,662 Liters) with 1-1/4” plunger
■ Simplex, duplex or quad configuration
■ 1 or 3 phase – TEFC or explosion-proof motors available
■ Plunger sizes: 1/2”, 3/4”, 1”, 1-1/4”
■ Flow adjustable while running with adjustable crosshead

Head Size Model PSI Volume Range LPD

3/16″
3/16″
1/4″
1/4″
3/8″
3/8″
1/2″
1/2″
3/4″
3/4″
1″
1″
1-1/4″
1-1/4″

34G4
34F4
34G1
34F1
34G3
34F3
34G5
34F5
34G6
34F6
34G7
34F7
34G8
34F8

7,500
7,500
7,500
7,500
5,500
5,500
4,000
4,000
3,200
3,200
1,000
1,000
500
500

3.71 to 37.1
7.42 to 74.19
6.51 to 65.11
13.02 to 130.22
14.84 to 148.39
29.68 to 296.78
26 to 255
52 to 522
62 to 624
125 to 1249
106 to 1060
212 to 2120
166 to 1665
333 to 3331

Pneumatic Driven Pumps

Series 5020 Gas/Pneumatic Driven Injection Pump

Flomore

Features: The Series 5020 pump is designed for high flow and high-pressure applications.

■ Pressure as high as 10,000 psi
■ Designed for continuous operation
■ Excellent for pumping chemicals, methanol, and corrosion inhibitors
■ Field adjustable speed/volume control
■ Simple modifi cation can lower pumping rate to one stroke every five minutes
■ Operates with air/gas pressures as low as 15 psi
■ Trim for corrosive applications available
■ Microswitch design available
■ Regulator, gauges, and tanks available as accessories

Head Size Model Pressure Max GPD (Cont./Int.)

1/4″
3/8″
1/2″
3/4″
1″
1-1/4″

5021
5023
5025
5026
5027
5028

12,000
12,000
12,000
5,000
3,000
2,000

16/20
43/56
85/105
160/190
320/400
500/625

Series 5200 Gas/Pneumatic Driven Injection Pump

Flomore

Features: The Series 5200 pump is powered by gas/air via a diaphragm with a spring return. The pump offers two strokes for adjustable 1” or 1/3” lengths and flow rates.

■ Direct acting
■ Powered by diaphragm motor with spring return
■ Field adjustable speed/volume control
■ Operates with air/gas pressures as low as 8 psi
■ Trim for corrosive applications available
■ Micro switch design available
■ Regulators, gauges and tanks available as accessories

Head Size Model Pressure Max Volume LPD

3/16″
1/4″
3/8″
1/2″

5204
5201
5203
5205

6,000
6,000
6,000
3,500

15.90
28.39
63.59
121.13

Series 6200 Gas/Pneumatic Driven Injection Pump Direct or Double Acting

Flomore

Features: The Series 6200 pump offers the highest flow rate, 20 gallons per minute, all the Flomore chemical injection pumps. This pump is well-suited for offshore applications with its optional three-part corrosive resistant paint system.

■ Positive displacement pump
■ Simplex or duplex offering
■ Field adjustable speed/volume control
■ Exhaust gas can be recovered to minimize gas consumption
■ Heads made from cast steel or 316 stainless steel
■ Minimum NDSHR – 8 feet of water
■ Trim for corrosive applications available
■ Regulators, gauges, and manifold available as accessories

Head Size Model Disch Press Volume Range GPD

1-1/4″

2-3/4″

4″

6201

6202

6204

9,000
7,000
5,000
3,500
1,800
1,500
1,100
700
900
680
490
300

576 to 2592
576 to 2448
576 to 2448
576 to 2304
4320 to 12816
4320 to 12672
4320 to 12672
4320 to 12528
6840 to 28080
6840 to 27360
6840 to 27360
6840 to 27360

Pump Parts

Flomore 4400 Gears

4400 Gears

Flomore
Best Seller
In Stock

Features: The Flomore 4400 parts including the gears are fully cross compatible with all major brands. Stocked locally at our Calgary warehouse, these parts are available for same day shipping. 

Flomore Packing & Orings

Packing and O-Rings

Flomore
Best Seller
In Stock

Features: Packing and O-Rings are available in a host of materials to match your chemical compatibility. We heavily stock SDP, Buna, Teflon, Viton, and many others. All of these are available in a variety of sizes to ensure a proper fit for your application.

Packing and O-Rings are fully cross compatible with most major pump brands.

Flomore Pilot & Microswitch

Pilot & Microswitch

Flomore
Best Seller
In Stock

Features: The Flomore Pilot & Microswitches for pneumatic pumps are cross compatible with other similar brands. These are readily available to ship same day.

Flomore Plunger

Plungers

Flomore
Best Seller
In Stock

Features: The Flomore chemical injection plungers are stocked in every standard size and are fully cross compatible with other pump brands.

Ceramic plungers are also available upon request to meet your chemical injection requirements.

Flomore Diaphragms

Pneumatic Pump Diaphragms

Flomore
Best Seller
In Stock

Features: The Flomore pneumatic pump diaphragms are interchangeable with all major brands. Locally stocked and readily available for same day shipping.

Specialty Pumps

Series 1300 Beam Driven Injection Pump

Flomore

Features: Designed specifically for operation on a beam pumped oil well, the Series 1300 pump is powered by a direct connection to the movement of a walking beam, rod line, or rocker arm.

■ Single or dual-headed units available
■ Simple design, easy maintenance

Head Size Model Pressure Volume Range LPD

3/16″
1/4″
3/8″
1/2″

1304
1301
1303
1305

3,000
1,500
1,000
500

0.24 to 2.08
0.24 to 3.41
0.24 to 8.52
0.47 to 14.2

View Items